Ichalkaranji, Kolhapur, Maharashtra

GST No. 27BLGPM1286C1Z7

Send Email

0804860530191% Response Rate

Home

About Us

Our Products

Contact Us

Home » Our Products » Field Welding Machines

Field Welding Machines

Leading Distributor / Channel Partner of worldpoly field butt fusion welding machine for hdpe pipes, poly rover trench pipeline welding machines for hdpe pipes and terrain field welding machine for hdpe pipes from Ichalkaranji.

Worldpoly Field Butt Fusion Welding Machine For Hdpe Pipes

REQUEST CALLBACK

Get Best Quote

Approx. Rs 15,00,000 / PieceGet Latest Price

Product Brochure

Product Details:

Automatic Grade

Automatic, Semi-Automatic

Worldpoly Hydra Field Welding Machine operated butt-welding machine, suitable for PE and PP pipes and fittings from 630 to 1200mm OD/24" to 48". The machine is the result of more than 50 consecutive years of direct involvement in the PE pipe industry, providing premium equipment for welding both on the worksite and in the factory.

Hydraulic open/close/locking main clamps allow easier pipe handling, while onboard hydraulic in/out facing tool and heating plate provides a single unit for movement to, from and around a site. Optional onboard diesel generator.

The use of virgin Aluminium castings and German hydraulic seals allows for lower weight without compromising strength and performance. Welding can be carried out between clamps 3 4 for tees, bends, and manifold work. Ready to accept optional data logger, and available in both low and high-force welding options.

Technical Specifications:

Welding range 630 to 1200mm/24" to 48" IPS: SDR 11 (PN16) to SDR 41 (PN4). 630 to 800mm: SDR 9 to SDR 41
Complete and ready to weld
Hydraulic open/close/locking main clamps. Hydraulic in/out facing tool and heating plate
The main frame includes 4 light weight alloy main clamps of 1200mm/48" diameter
IPS machine includes two-piece clamps (4 circles), including 48"x42", 42"x40", 40"x36", 36"x32", 32"x28", 28"x24"
Metric machine includes clamps (4 circles), including 1200x1000, 1200x900, 1200x800, 800x710, 800x630mm
Aluminium PTFE coated heating plate and electrically operated facing tool is hydraulically inserted and removed during a welding operation.
Stand for heating plate and facing tool assembly is attached to the rear of the main frame after shipping, and removed again at the end of the job
Electrohydraulic pump with controls, accumulator, and quick release hoses. Includes countdown timers for heating and cooling phases
Genuine 2-year international warranty
Optional steel stub device for welding end fittings
Wired ready to accept World poly or other data logger
Toolbox including tools, bolts etc
Optional wheeled trolley and on-board diesel generator available
400 volt 3 phase 50/60 Hz (30.6 kw, 47.6 A)
Minimum generator required: 400 volt 3 phase 50 hz, 32 KVA. Provide full machine details to generator supplier before purchase
Weight 5000 kg
Total cylinder area: 56 cm2, maximum pump pressure 180 bar. Optional 120 cm2 x 200 bar
Please note technical specifications of Worldpoly machines may change without notice

Yes! I am Interested

Poly Rover Trench Pipeline Welding Machines For HDPE Pipes

REQUEST CALLBACK

Get Best Quote

Approx. Rs 10,00,000 / PieceGet Latest Price

Australian Made Poly Rover Trench Pipeline Welding Machines reduces workload and the need for extra support equipment on remote sites, allowing faster, more efficient welding of PE and PP pipelines.Fast changeover time improves weld quality and consistency.

Practical design using Bosch Rexroth hydraulics, PolyRover features hydraulically lifted facing tool and heating plate, hydraulic pump and controls all on-board the main frame, easy trench use, welding between clamps 2 and 3 or 3 and 4 for tight fittings work, plus high quality and sturdy construction, provides an excellent machine for pipeline welding.

Born from more than 55 years and three generations of experience with PE pipe and three dedicated years or research and development with Bosch Rexroth, and having clients in more than 105 countries, Worldpoly wholesalers the PolyRover range in Australia to provide a single platform for welding, according to low and optionally high-pressure standards.

Worldpoly PolyRover machines are specifically designed for use in rugged and remote terrain, are easily operated and are pre-wired for the attachment of Worldpoly or other data loggers.

Technical Specifications:

Australian made
Genuine 5 year international warranty
Main frame includes: 4 clamp sets for 630mm diameter
Easily able to weld between clamps 3 and 4 for tight fittings and fabrications
Entire welding frame with 4 clamps and all hydraulics is easily removed for trench work, allowing accurate alignment
Fork lift and overhead lifting points
Includes reducing liners to weld pipe within the complete specified range:
Metric – 630, 560, 500, 450, 400, 355 and 315mm OD

Alternatively:

Inch – 24, 22, 20, 18, 16, 14 and 12”
Hydraulically lifted cast Aluminium PTFE coated heating plate with electronic temperature control and insulated cover
Hydraulically lifted and electrically operated cast Aluminium electric facing tool, thermostatically controlled with current overload protection
High quality and remotely serviceable Bosch Rexroth electro-hydraulic pump and hydraulics.
Wired ready to accept Worldpoly and other data loggers

Operating voltage:

Standard 400 volt 3 phase 50 Hz 16.8kW. Requires generator minimum 18 KVA.
Modular controls located in convenient operator position
All hydraulic operation controls
Digital pressure readout
Countdown timer
Emergency stop
IP63

Tool box including spare blades, thermocouple, temperature controller, tools etc

Options include:

Welding according to low pressure, or alternatively both low and high-pressure welding standards (must be specified at time of quotation/order confirmation) Stub end device for welding end fittings (available in Aluminium or Steel)

Additional Information:

Item Code: 630-24

Yes! I am Interested

Terrain Field Welding Machine For HDPE Pipes

REQUEST CALLBACK

Get Best Quote

Approx. Rs 8,00,000 / PieceGet Latest Price

Product Details:

Automatic Grade

Automatic, Semi-Automatic

Terrain Field Welding Machinev For HDPE Pipes : Reducing workload and the need for extra support equipment on remote sites allow for faster, more efficient welding of PE and PP pipelines.

Practical Australian design with hydraulically lifted facing tool and heating plate, optional hydraulic open/close/locking of pipe clamps, hydraulic pipe lifters left and right, hydraulic pump and controls all onboard the main frame, plus high quality and sturdy construction provides an excellent machine for pipeline welding.

Born from more than 55 years and three generations of experience with PE pipe plus 3 years of dedicated research and development with Bosch Rexroth, and having clients in more than 105 countries, Worldpoly wholesalers the PolyRover range in Australia to provide a single platform for welding, according to low-force or optionally high-force standards.

Worldpoly PolyRover machines are specifically designed for use in rugged and remote terrain, easily operated and are pre-wired for the attachment of Worldpoly or other data loggers. Hydraulics are the highest quality and internationally serviceable Bosch Rexroth. Electrics are all local.

Technical Specifications:

Australian made
Genuine 5 year International warranty

The main frame includes 4 clamp sets for 630mm diameter:

Easily able to weld between clamps 3 and 4 for tight fittings and fabrications
Entire welding frame with 4 clamps easily removed for trench work, allowing accurate alignment
Forklift and overhead lifting points
Includes reducing lines to weld pipe within the complete specified range
Metric – 630, 560, 500, 450, 400, 355 and 315mm OD

Alternatively:

Inch – 24, 22, 20, 18, 16, 14 and 12”
Hydraulically lifted cast Aluminium PTFE coated heating plate with electronic temperature control and insulated cover
Hydraulically lifted and electrically operated cast Aluminium electric facing tool, thermostatically controlled with current overload protection
High quality and remotely serviceable Bosch Rexroth electro-hydraulic pump, valves and controls
Wired ready to accept Worldpoly and other data loggers

Operating voltage:

Standard 400 volt 3 phase 50 Hz 14.6kW, 23A. Requires generator minimum 18 KVA
Modular controls located in convenient operator position
All welding operation controls
Digital pressure readout
Countdown timer
Emergency stop
Steerable wheeled base readily removable for trench work
High-quality wide profile all-terrain wheels and tyres
Hydraulic pipe lifters front and rear
Offset steering
Not road registrable
Toolbox including spare blades, thermocouple, temperature controller, tools etc

Options include:

Welding according to low pressure, or alternatively both low and high-pressure welding standards
Stub end device for welding end fittings (available in Aluminium or Steel)

Clamp options include:

Supplied with the machine - Layer clamps metric: 630 x 560, 560 x 500, 500 x 450, 450 x 400, 400 x 355 and 355 x 315mm
Optional layer clamps inch: 24” x 22”, 22” x 20”, 20” x 18”, 18” x 16”, 16” x 14” and 14” x 12”
Two-piece clamps 630 x 560, 630 x 500, 630 x 450, 450

Yes! I am Interested

Looking for Field Welding Machines ?